advertisement
Gas Turbine Engineering Handbook
Introduction
 |
| Gas Turbine Engineering Handbook |
Gas Turbine Engineering Handbook discusses the design, fabrication, installation, operation, and maintenance of gas turbines. The third edition is not only an updating of the technology in gas turbines, which has seen a great leap forward in the 2000s, but also a rewriting of various sections to better answer today’s problems in the design, fabrication, installation, operation, and maintenance of gas turbines. The third edition has added a new chapter that examines the case histories of gas turbines from deterioration of the performance of gas turbines to failures encountered in all the major components of the gas turbine. The chapter on Maintenance Techniques has been completely rewritten and updated. The revised chapter deals with Long Term Service Agreements (LTSAs), and special maintenance tables have been added so that you can troubleshoot problems on gas turbines that you may encounter.
advertisement
Table of Contents
Introduction
1 An Overview of Gas Turbines
Gas Turbine Cycle in the Combined Cycle or Cogeneration Mode.
Gas Turbine Performance.
Gas Turbine Design Considerations.
Categories of Gas Turbines.
Major Gas Turbine Components.
Fuel Type.
Environmental Effects.
Turbine Expander Section.
Coatings.
Gas Turbine Heat Recovery.
Supplementary Firing of Heat Recovery Systems.
2 Theoretical and Actual Cycle Analysis
The Brayton Cycle.
Actual Cycle Analysis.
The Brayton-Rankine Cycle.
Summation of Cycle Analysis.
A General Overview of Combined Cycle Plants.
Compressed Air Energy Storage Cycle.
Power Augmentation. Summation of the Power Augmentation Systems
3 Compressor and Turbine Performance Characteristics
Turbomachine Aerothermodynamics.
The Aerothermal Equations. Efficiencies.
Dimensional Analysis.
Compressor Performance Characteristics.
Turbine Performance Characteristics.
Gas Turbine Performance Computation.
4 Performance and Mechanical Standards
Major Variables for a Gas Turbine Application.
Performance Standards. Mechanical Parameters.
Application of the Mechanical Standards to the Gas Turbine.
Specifications
5 Rotor Dynamics
Mathematical Analysis.
Application to Rotating Machines.
Critical Speed Calculations for Rotor
Bearing Systems.
Electromechanical Systems and Analogies.
Campbell Diagram. Bibliography.
Download full PDF in Comment section
advertisement
Gas Turbine Engineering Handbook
ReplyDelete