Piping and Pipeline Calculations Manual: Construction, Design Fabrication and Examination

advertisement

Piping and Pipeline Calculations Manual: Construction, Design Fabrication and Examination

Description

Piping and Pipeline Calculations Manual


Piping and Pipeline Calculations Manual is a "no nonsense" guide to the principle intentions of the codes or standards and provides advice on compliance. After using this book the reader should come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The focus of the book is to enhance participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book is enhanced by a multitude of calculations to assist in problem solving, directly applying the rules and equations for specific design and operating conditions to illustrate correct applications. Each calculation is based on a specific code.

Key Features

  1. Written by a professional/educator with over 35 years of experience
  2. Covers all major codes and standards
  3. Demonstrates how the code and standard has been correctly and incorrectly applied

advertisement

Table Of Contents

PART I: INTRODUCTION

CHAPTER 1 - Major Codes and Standards

CHAPTER 2 - Metric versus U.S. Customary Measurement

CHAPTER 3 - Selection and Use of Pipeline Materials

PART II: CONSTRUCTION AND DESIGN FABRICATION

CHAPTER 4 - Piping and Pipeline Sizing, Friction Losses, and Flow Calculations

CHAPTER 5 - Piping and Pipeline Pressure Thickness Integrity Calculations

CHAPTER 6 - Straight Pipe, Curved Pipe, and Intersection Calculations

CHAPTER 7 - Piping Flexibility, Reactions, and Sustained Thermal Calculations

CHAPTER 8 - Pipe-Supporting Elements and Methods Calculations

CHAPTER 9 - Specialty Components

CHAPTER 10 - High-Frequency versus Low-Frequency Vibration Calculations

CHAPTER 11 - Occasional Loads Calculations

CHAPTER 12 - Slug Flow and Fluid Transients Calculations

CHAPTER 13 - Fabrication and Examination Elements Calculations

CHAPTER 14 - Valves and Flow Control Calculations

Download full PDF in Comment section

advertisement

1 Comments

Previous Post Next Post